Showing posts with label Avoid. Show all posts
Showing posts with label Avoid. Show all posts

Top Seven Tips and Things to Avoid When Washing Your Motorhome





sexy Girl photo





Well, I guess it goes without saying that some of the things we think are the simplest to do, often cause the most aggravation. Perhaps it's because they are such easy jobs, that we forget some of the pit falls along the way. Today's discussion is about washing your own motor home and saving the money. It's not easy to find a truck wash, or a carwash which is willing to wash your RV. And if you hire a mobile car washing or auto-detailing service to come to your house and clean your motor coach, sometimes the price is a little overbearing.

You see, after I retired I bought a big motor coach and I went to every single city in the United States over a seven-year period. It was absolutely exhilarating and fun and I must say; what a great country we live in. Nevertheless, I often washed my own motor home because I didn't want to go to a truck wash which used hydrofluoric acid because it might ruin decals. Secondly, I wanted it done right, and therefore I did it myself.

Now then, I'd like to talk to you about some of the things you should avoid and give you some tips to help you clean your own motor coach just like me. Below are some tips;

1. Be very careful not to put too much water on top of the vehicle
2. Be sure to close the windows
3. Only use soft bristle brushes
4. Only wash the vehicle in sections
5. Use a shut off nozzle
6. Make sure wash water run-off stays out of the storm drain
7. Have a step ladder available to clean the windows outside

If you put too much water on top while you are washing, then it will puddle on top and could leak into the cabin, or drip down the sides and leave streaks. Worse, if the puddles are on top and you drive away it will go all over the side and ruin your perfect wash job. And if you leave your motor coach there for a while with the puddle-water on top, mosquitoes might lay their eggs.

I recommend using a soft bristle brush which is 18-inches wide, the kind of brush you might use on a hardwood floor. Also, make sure all the windows are closed because the water will leak in, especially if you are using a small pressure washer, or a garden hose with a powerful nozzle. Speaking of nozzles make sure you have a shutoff nozzles so you don't waste water. And speaking of water, make sure that your dirty wash water doesn't go into a storm drain and pollute.

Lastly, you need a stepladder to make sure that you clean the outside windows perfectly, because if you are inside your motorhome that's the most important part when looking out. Indeed I hope you will use these tips to do a perfect job when you clean your own RV. Please consider all this and think on it.

Lance Winslow is a retired Founder of a Nationwide Franchise Chain, http://www.truckwashguy.com/ and now runs the Online Think Tank. Lance Winslow believes writing 24,222 articles by July 22, 2011 at 2:22 PM is going to be difficult because all the letters on his keyboard are now worn off now..


View the original article here

Top 7 Things to Avoid When Maintaining Your Pace in Fleet Truck Washing





sexy Girl photo





If you own a mobile truck washing business, then you will be cleaning fleets of vehicles in the company yard of the firm that you have the contract with. There are some things you need to know if you hope to make money doing this, because it is all about production and efficiency. After all, you are giving the company a fleet discount, and you may be washing each truck or vehicle for a very low price, but you hope to make it up in volume due to the economies of scale.

Before retirement, I had franchised a mobile truck washing business around the country, and I'd like to give you some tips in improving your efficiency and maintaining a fast pace when cleaning fleets of vehicles. You must understand the money is in the time and efficiency, not in the per unit wash. Okay so let me give you some good solid tips for you to think about;

1. Use a high pressure hose that is light, but doesn't easily kink
2. Make sure debris stays out of your fresh water tank
3. Make sure no dirty wash water goes into any storm drain
4. Don't let the brushers get too far ahead of the rinsing man
5. When cleaning box trucks, do all the rear ends first
6. In cold climates be careful not to allow ice to form
7. Don't get too close to the decals

Your high-pressure hose should be lightweight so that you don't throw out your back trying to move it around, but it also needs to be double steel braided so it doesn't kink easily. When filling up your water tank you must make sure that the garden hose you use doesn't have any gravel around it, because that gravel can get inside the tank, and often it gets through the filters and into the pump. When this happens your pump's pressure will go way down, and then you have to take apart to get the grit out, which takes a lot of time.

You must also remember that you must do environmentally friendly washing, and use the correct methods, never letting water that's dirty go into a storm drain. When you are washing you'll have a crew of many people, and you have to make sure that the people brushing with the soap don't get too far ahead of the person rinsing, otherwise the soap will not come off, it will dry on, and you have to re-wash those vehicles to prevent streaks.

When cleaning box trucks I recommend that you do all the rear ends first, because they are all the same and you can do them quicker that way, then go ahead and wash the rest of the vehicles in a line. In colder climates you must be careful not to allow ice to form, and take a little road-salt with you to sprinkle all the puddles so you don't slip and fall. I once had an employee cut themselves very badly when they slipped and tried to grab a piece of the truck that was near them, and an old rusty bolt sticking out cut and sliced them open - many stitches big scar, expensive hospital bill as I recall.

Lastly, remember those decals with the company logos on them don't do too well when a hot-water pressure-washer nozzle is directly upon them. That pressure and power can rip the decals, and your customers will be very angry if you do that, the decals aren't cheap. Indeed I hope you will please consider all this and think on it.

Lance Winslow is a retired Founder of a Nationwide Franchise Chain, http://www.truckwashguy.com/ and now runs the Online Think Tank. Lance Winslow believes writing 24,222 articles by July 22, 2011 at 2:22 PM is going to be difficult because all the letters on his keyboard are now worn off now..


View the original article here